This mounting system offers superior stability and versatility.
1 SUN checker is used for checking the light intensity (1 SUN) of HAL-320. It is battery operated and portable.
This light guide is the option for bringing a light into a glove box. The gauge port is equipped.
The telecentric uniform illumination unit achieves a parallel illumination by connecting to a collimator lens.
The high condensing lens achieves a high density illumination by connecting to a light guide.
|Output wavelength||400 - 1100nm|
|Circuit method||Switching power supply|
|Input voltage||AC100V 50/60Hz (Input range: AC90 - 132V)|
|AC200V 50/60Hz (Input range: AC198 - 264V)|
|*Select input voltage when placing an order.|
|Apparent power||Less than 350VA (AC100V/50Hz)|
|Less than 440VA (AC240V/50Hz)|
|Lamp type||Xenon lamp 100W|
|Lamp voltage, current||12.8 - 14V 7.2A (DC) *Representative value|
|Lamp life||500h (Average)|
|*When the light intensity has decreased by 50% from the initial value.|
|Optical axis alignment||Cartridge type (Alignment-free)|
|Cooling method||Forced air cooling|
|Shutter||Pulsed motor drive|
|Light intensity control||100 - 5 (Steps)|
|Air Mass filter||Air Mass 1.5G filter|
|Emitting method||Bundled light guide|
|Remote control||RS232C *The cable must be less than 3m.|
|Safety mechanism||Xenon lamp problem, Rear door is open,|
|Lamp usage exceeds 500 hours, Cooling fan problem,|
|Recommended environment||Temperature 10 - 35 deg C|
|Humidity 20 - 80% *Avoid condensation|
|Dimensions||200(W) x 340(D) x 245(H)mm|